Single Channel Stahl Safety Barrier for HMT360

The Stahl safety barriers enable the intrinsic safe operation of the HMT360 Series Transmitters. Each 4-20mA output of the HMT360 Series requires a barrier. Safety barriers should be located outside the hazardous area. The Stahl part number is 9001/51-280-091-14.

This Stahl barrier is acceptable to use if the supply voltage to the barrier is between 24-35VDC, the cable length between the transmitter and the barrier is less than 300m, and the external load created by additional components in the loop is less than 200ohms. If the installation requirements do not satisfy these parameters, then please contact Stahl for their recommendation.

The barriers can be mounted on a DIN rail or optional wall mountable general purpose electronics enclosure.